The Marble Print Bar – A Drying Rack for Linocut & Relief Prints

The Marble Print Bar – A Drying Rack for Linocut & Relief Prints

Single Bar — Maple — (17 prints) — $158 / Black
$158.00
Skip to product information
The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • Five marbles, blue, green, clear, white, black. 1" diameter on a wood table
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
  • The Marble Print Bar – A Drying Rack for Linocut & Relief Prints
The Marble Print Bar – A Drying Rack for Linocut & Relief Prints

The Marble Print Bar – A Drying Rack for Linocut & Relief Prints

$158.00

The Marble Print Bar

Running out of table space mid-edition? This bar hangs from your ceiling and holds 17 freshly printed linocuts or woodcuts in open air. Glass marbles gently wedge each print in place.

No clips. No pressure points. Just a clean, dry print when you come back to it. 

How it works:

Slide a freshly printed sheet between the marble and the wood. The marble holds it upright while it dries, then lifts out clean, no marks left behind. Three pre-installed eye hooks (two ends, one center) keep weight evenly distributed.

 

What you get:

  • Solid wood bar, 36" long x 1.5" wide x 1.8" tall
  • Hand-finished with water-based matte varnish
  • 17 glass marbles in your choice of color: white, green, black, clear, blue (message me before ordering for other color availability)
  • Three pre-installed eye hooks
  • Choice of hard maple or walnut
  • Holds 17 prints

You'll supply your own rope and ceiling hardware to fit your space.

Built to grow with your practice:

One bar covers a small studio run. Two gives you room for regular edition work. Three handles a full edition with space to spare.

  • Single Bar (17 prints) — $158
  • Studio Pair (34 prints) — $298 (save $18)
  • Edition System (51 prints) — $449 (save $25)

Bars can hang level or staggered. Adding a second or third bar later is simple.

A note on paper:

This bar is built for freshly printed sheets and prints between color layers, not soaking-wet paper. Fully saturated paper can mark where it touches the marble.

Processing time is two weeks. You'll get a shipping notice once it's on its way

Preview your combo
Marble Print Bar — Wood & Marble Visualizer
Marble Print Bar

Wood
Marble

You may also like

Frequently asked questions

What size prints does this hold?

The Marble Print Bar works with any paper thickness, from thin Japanese tissue to heavy cotton rag. Print width isn't constrained by the bar itself, though very wide sheets may bow slightly while hanging. Each print is held at a single point by one marble.
Can I choose my marble color?

Yes. At checkout you can select from the available colors listed above. For something different, send a message before ordering and I'll confirm availability.
How do I hang it?

The Marble Print Bar comes with three eye hooks already installed. You'll supply your own rope and ceiling hardware to suit your space.
Can I add more bars later?

Yes. Each bar is sold individually or as a two or three bar bundle. If you start with one and want to expand, additional bars can be ordered anytime.
How long until it ships?

Production time is two weeks. You'll get a shipping notification as soon as it's on its way.
Can I hang wet paper?

This bar is designed for freshly printed linocuts and woodcuts with wet ink, and for holding prints between color layers. It's not suitable for soaking-wet paper. The marble contact point can mark paper that's saturated with water.

How it's Made

Every Marble Print Bar is designed and made in my studio in Columbus, Ohio.

Customer Reviews

Overall rating: 5 / 5 from 32 reviews.