I made a bit more progress on the arm today. I finished up the design for the pen gripper and the holder for multiple pens...

This is going to be the first post of an ongoing project of a robotic drawing arm. For a little bit of background, I've been working on a fairly complicated robotic project over the last few years, basically a 16 servo, 4-legged walking robot...

I finished off this print today. The YouTube video is at the end of this post. I started off today by prepping the paper for chine-colle´. I had a nice sheet of this grey paper....

I made a lot of progress on this print tonight. I started by flipping and then transferring my sketch onto the copper plate. I use white wax-free transfer paper, but then I go over it again with pencil to help it stick...

This print is looking at simple machines, which are: Lever, Wheel and axle, Puller, Inclined Plane (This print), Wedge, and Screw.

I have a tendency to make things more complicated than they should be, and given the space, I'll add details to no end. So part of the idea of this print of an inclined plane was to restrict it to a smaller size...

This weeks video is a timelapse...

This week a rock a copper plate and scrape and burnish my image into it...

This week I did a tour of my Printmaking toolbox....

This weeks video documents how I make a plaster print using a copper plate mezzotint, ink, and plaster...

This weeks video is a mezzotint print of the first law of robotics. This is part of a three part series that I'll be working on over the next few months. Here are the complete laws according to Asimov...