{"title":"All Products","description":null,"products":[{"product_id":"linocut-registration-jig","title":"Linocut Registration Jig","description":"\u003cp\u003eRegistration is one of those things that sounds simple until it isn't. A slightly shifted block, a paper that moved just a hair, and suddenly your second color is off and the whole edition feels like a mess. I built this jig because I got tired of that frustration.\u003c\/p\u003e\n\u003cp\u003eIt's a small tool with a straightforward job: keep your block in the same spot, keep your paper landing in the same spot, and let you focus on the actual printing.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow it works:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003ePlace your unmounted lino block in the corner of the jig. Align your paper edge to a grid line and mark it with a small piece of painter's tape. That's your registration point. Every sheet after that hits the same spot, consistently, without fussing with pins or rebuilding a setup from scratch.\u003c\/p\u003e\n\u003cp\u003eThe \u003cem\u003e1\/8\" laser-cut acrylic grid\u003c\/em\u003e gives you fine control over placement. The corner alignment holds your block steady for every pull in your edition.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMaterial: 1\/8\" laser-cut acrylic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDimensions: 4\" x 9.25\" (external)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGrid: 1\/8\" increments, labeled every 1\/2\"\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eColor options: see available choices above\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProcessing time: cut to order, typically ships well within 10 business days\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShipping included in price\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWorks for:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eMulti-color linocuts, reduction printing, or any edition where consistent registration makes the difference. Works equally well on a press or hand printing with a \u003cem\u003ebaren\u003c\/em\u003e or spoon. If you don't have press access, this jig is just as useful on a table.\u003c\/p\u003e\n\u003cp\u003eCompatible with rubber blocks, wood blocks, and \u003cem\u003eSpeedball Speedy-Carve\u003c\/em\u003e, as long as your block is at least 1\/8\" thick.\u003c\/p\u003e\n\u003cp\u003eIf you're working with mounted lino, I also make a 3\/4\" \u003cem\u003e3D printed riser\u003c\/em\u003e that brings the jig up to block height. You can add it as an option at checkout.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow to use it:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSet the jig on your work surface\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTape it down with blue painter's tape if you want it secure (tape not included)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePlace your inked block in the corner\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAlign your paper to the grid line you've chosen\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMark that line with a small piece of tape so you can find it again\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePrint, repeat, stay registered\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe grid is clearly labeled so you can see what you're working with. The corner does the holding. The tape marks do the remembering.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWipe clean with a damp cloth after printing. Acrylic won't absorb ink and cleans up quickly. Store flat. Avoid harsh solvents, which can cloud the surface over time.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eNeed a different size?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThis jig covers most standard linocut projects. If you're working larger or have something specific in mind, message me and we can talk through custom dimensions.\u003c\/p\u003e\n\u003cp\u003eI designed this out of necessity after years of printing in my own studio. It's the tool I kept wishing existed. If it helps your workflow the way it helped mine, that's what it was made for.\u003c\/p\u003e","brand":"Diode Press","offers":[{"title":"Red \/ Left Corner \/ Include 3\/4\" Riser","offer_id":46939809218759,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ Left Corner \/ No Riser","offer_id":46939809251527,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ Right Corner \/ Include 3\/4\" Riser","offer_id":46970178764999,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Red \/ Right Corner \/ No Riser","offer_id":46970178797767,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ Left Corner \/ Include 3\/4\" Riser","offer_id":46939809284295,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ Left Corner \/ No Riser","offer_id":46939809317063,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ Right Corner \/ Include 3\/4\" Riser","offer_id":46970178830535,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ Right Corner \/ No Riser","offer_id":46970178863303,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/6699\/4631\/files\/c5e233b3-il_fullxfull.5376689499_8oie.jpg?v=1785766603"},{"product_id":"ink-tube-rack","title":"Ink Tube Rack for Block Printing","description":"\u003cp\u003eInk tubes have a talent for disappearing. Buried in a drawer, rolled behind something, or just not where you left them when your block is already inked and you're ready to print. This rack keeps them on the wall, upright, and visible so you can grab what you need without the hunt.\u003c\/p\u003e\n\u003cp\u003eEach rack holds 4 tubes, cradled beneath the cap and held upright. Mount it to your wall, pegboard, or \u003cmeta charset=\"utf-8\"\u003eIkea Skadis system and you've got a clear view of your whole ink collection at a glance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShips fully assembled and ready to install. Three mounting styles available at checkout:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cem\u003eScrew mount\u003c\/em\u003e — installs directly to any wall or vertical surface. Works with Command strips too if you'd rather not drill.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cem\u003e\u003cmeta charset=\"utf-8\"\u003eIkea Skadis pegboard\u003c\/em\u003e — slide the tabs in and you're done.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cem\u003eStandard pegboard\u003c\/em\u003e — fits standard 1\" x 1\" hole spacing, hooks on like any other pegboard accessory.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3D printed in durable PLA plastic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShips fully assembled\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHolds 4 tubes per rack\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDimensions: 7.25\" wide x 1.25\" tall x 1.25\" deep from wall\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDefault color: white. Want something different? Send me a message before ordering and I'll let you know what's currently in stock. No extra charge for color.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInk tubes not included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBundle options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFlat rate shipping is $6 regardless of how many you order, so it makes sense to stock up. I use five racks in my own studio to keep everything sorted and within reach — grouped by type, color family, or however your workflow runs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSingle Rack (holds 4 tubes) — $7\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStudio Set (2 racks, holds 8 tubes) — $13 (save $1)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInk Set (3 racks, holds 12 tubes) — $18 (save $3)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFull Studio Set (5 racks, holds 20 tubes) — $28 (save $7)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProcessing time is up to 10 business days before shipping, often less.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWorks with\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with most standard printmaking ink tubes from brands like \u003cem\u003eSpeedball\u003c\/em\u003e, \u003cem\u003eGamblin\u003c\/em\u003e, \u003cem\u003eCaligo\u003c\/em\u003e, and similar. The rack cradles tubes beneath the cap, so it accommodates slight size differences between brands. Works with oil-based and water-based inks alike, and fits acrylic and oil paint tubes too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eScrew mount:\u003c\/em\u003e Mark your hole placement, drill pilot holes if needed, and screw it in. Or skip the drilling and use a Command strip on the back.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSKADIS pegboard:\u003c\/em\u003e Slide the mounting tabs into the board. That's it.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStandard pegboard:\u003c\/em\u003e Hooks on like any standard pegboard accessory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed something custom?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDifferent size, color, or mounting style — message me before ordering and we can work something out.\u003c\/p\u003e\n\u003cp\u003eI built this because I got tired of digging for the right color mid-print. A few racks on the wall changed how my whole studio feels to work in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo the tubes sit upright or hang upside down?\u003c\/strong\u003e Upright, cap facing up. The rack cradles them from beneath the cap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size tubes does this fit?\u003c\/strong\u003e Most standard printmaking ink tubes regardless of slight size differences between brands. Speedball, Gamblin, Caligo, and similar all work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mount this without drilling?\u003c\/strong\u003e Yes. The screw mount version works with Command strips — stick one to the back and press it onto your wall.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I don't have a pegboard?\u003c\/strong\u003e Choose the screw mount option. It works on any wall or vertical surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e Up to 10 business days processing, often shorter. Shipping after that runs 3-5 business days depending on your location.\u003c\/p\u003e","brand":"Diode Press","offers":[{"title":"Screw Mount \/ Single Rack","offer_id":46939809349831,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"Screw Mount \/ Studio Set - 2 racks","offer_id":46939809382599,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true},{"title":"Screw Mount \/ Ink Set - 3 racks","offer_id":46939809415367,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true},{"title":"Screw Mount \/ Full Studio Set -5 racks","offer_id":46939809448135,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Ikea Skadis \/ Single Rack","offer_id":46939809480903,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"Ikea Skadis \/ Studio Set - 2 racks","offer_id":46939809513671,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true},{"title":"Ikea Skadis \/ Ink Set - 3 racks","offer_id":46939809546439,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true},{"title":"Ikea Skadis \/ Full Studio Set -5 racks","offer_id":46939809579207,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Standard Pegboard \/ Single Rack","offer_id":46939809611975,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"Standard Pegboard \/ Studio Set - 2 racks","offer_id":46939809644743,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true},{"title":"Standard Pegboard \/ Ink Set - 3 racks","offer_id":46939809677511,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true},{"title":"Standard Pegboard \/ Full Studio Set -5 racks","offer_id":46939809710279,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/6699\/4631\/files\/3689e045-il_fullxfull.7630697663_4shm.jpg?v=1785766603"},{"product_id":"printmaking-brayer-holder","title":"Printmaking Brayer Holder","description":"\u003cp\u003eBrayers have a way of ending up exactly where you don't want them. Rolling off the table, sitting in a drawer, or resting roller-down on your bench between prints. This holder keeps them off your work surface, visible, and easy to grab when you need them.\u003c\/p\u003e\n\u003cp\u003eIt cradles your brayer by the handle with the roller suspended in the air. Set down an inked brayer between pulls without worrying about it rolling away or leaving marks on clean paper. Handy during cleanup too, when you need both hands free.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eMounting options:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eShips fully assembled and ready to install. Three mounting styles available at checkout:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cem\u003eScrew mount\u003c\/em\u003e — installs directly to any wall or vertical surface. Works with Command strips too if you'd rather not drill.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cem\u003eIKEA SKADIS pegboard\u003c\/em\u003e — slide the tabs in and you're done.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cem\u003eStandard pegboard\u003c\/em\u003e — fits standard 1\" x 1\" hole spacing, hooks on like any other pegboard accessory.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e3D printed in durable PLA plastic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eShips fully assembled\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDimensions: 1.75\" tall x 1.6\" wide x 0.6\" deep from wall\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDefault color: white. Want something different? Send me a message before ordering and I'll let you know what's currently in stock. No extra charge for color.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBrayer not included\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eBundle options:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eFlat rate shipping is $6 regardless of how many you order, so it makes sense to grab what you need up front. Most printmakers have more than one brayer — different sizes for different blocks, or separate rollers for different ink colors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSingle Holder — $7\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStudio Set (2 holders) — $13 (save $1)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInk Set (3 holders) — $18 (save $3)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFull Studio Set (5 holders) — $28 (save $7)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProcessing time is up to 10 business days before shipping, often less.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eDesigned around \u003cem\u003eSpeedball\u003c\/em\u003e brand brayers and most standard soft rubber brayers with a similar handle shape. If you're not sure whether your brayer will fit, send me a message before ordering.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eScrew mount:\u003c\/em\u003e Mark your hole placement, drill pilot holes if needed, and screw it in. Or skip the drilling entirely and use a Command strip on the back.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSKADIS pegboard:\u003c\/em\u003e Slide the mounting tabs into the board. That's it.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStandard pegboard:\u003c\/em\u003e Hooks on like any standard pegboard accessory.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eNeed something custom?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eDifferent size, color, or mounting style — message me before ordering and we can work something out.\u003c\/p\u003e\n\u003cp\u003eI designed this because my own brayers kept ending up in the wrong place at the wrong time. If it keeps your studio a little more organized, that's exactly what it's there for.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eHow many brayers does one holder support?\u003c\/strong\u003e One holder, one brayer. Pick the bundle that matches how many you use regularly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with inked brayers between prints?\u003c\/strong\u003e Yes. The roller stays suspended off the surface. For long-term storage, clean your brayers first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I don't have a pegboard?\u003c\/strong\u003e Choose the screw mount option. It works on any wall or vertical surface, with screws or Command strips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e Up to 10 business days processing, often shorter. Shipping after that runs 3-5 business days depending on your location.\u003c\/p\u003e","brand":"Diode Press","offers":[{"title":"Screw Mount \/ Single Holder — $7","offer_id":46939809808583,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"Screw Mount \/ Studio Set (2 holders) — $13 (save $1)","offer_id":46939809841351,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true},{"title":"Screw Mount \/ Ink Set (3 holders) — $18 (save $3)","offer_id":46939809874119,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true},{"title":"Screw Mount \/ Full Studio Set (5 holders) — $28 (save $7)","offer_id":46939809906887,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"IKEA Skådis \/ Single Holder — $7","offer_id":46939809939655,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"IKEA Skådis \/ Studio Set (2 holders) — $13 (save $1)","offer_id":46939809972423,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true},{"title":"IKEA Skådis \/ Ink Set (3 holders) — $18 (save $3)","offer_id":46939810005191,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true},{"title":"IKEA Skådis \/ Full Studio Set (5 holders) — $28 (save $7)","offer_id":46939810037959,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Standard Pegboard \/ Single Holder — $7","offer_id":46939810070727,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"Standard Pegboard \/ Studio Set (2 holders) — $13 (save $1)","offer_id":46939810103495,"sku":null,"price":13.0,"currency_code":"USD","in_stock":true},{"title":"Standard Pegboard \/ Ink Set (3 holders) — $18 (save $3)","offer_id":46939810136263,"sku":null,"price":18.0,"currency_code":"USD","in_stock":true},{"title":"Standard Pegboard \/ Full Studio Set (5 holders) — $28 (save $7)","offer_id":46939810169031,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/6699\/4631\/files\/42e7d7d4-il_fullxfull.7946252830_fbt0.jpg?v=1785766603"},{"product_id":"dust-manifold-cnc","title":"Woodworking and CNC dust Collection 3-Port Manifold - Digital File","description":"\u003cp\u003eConnect two dust collection attachments to one hose. This 3D printed manifold allows you to choose either input, or both at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.instagram.com\/reel\/DRH6NYpAFeu\/?utm_source=ig_web_copy_link\u0026amp;amp;igsh=MzRlODBiNWFlZA==\" target=\"_blank\" rel=\"noopener\"\u003eSee it in action here!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eA pin in the handle rides in a groove for A or B operation, but lift up on the knob and you can rotate 180 to then capture dust from ports A \u003cu\u003eAND\u003c\/u\u003e B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ports are designed to fit 2.5\" (63.5mm) hoses.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis manifold was originally designed for personal use, but due to numerous requests, the design files are now available for others. It has only been tested on my specific setup, so you are responsible for proper installation and ensuring it operates safely in your own environment.\u003c\/p\u003e\n\u003cp\u003eIncluded are .STL files of all the components, as well as an exploded view for assembly.\u003cbr\u003eI’ve also included a .STEP file of the full assembly, so you can modify as you wish.\u003c\/p\u003e\n\u003cp\u003eA few notes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eI would suggest printing at least the main body from PETG, so it does not warp (I printed everything else with PLA).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eI made self tapping holes for M3 bolts to assembly the lid and handle, but you could drill out and use head-set inserts if you’d like (M3 heat set inserts: \u003ca rel=\"noopener\" href=\"https:\/\/www.mcmaster.com\/catalog\/131\/3643\/94459A769\"\u003ehttps:\/\/www.mcmaster.com\/catalog\/131\/3643\/94459A769\u003c\/a\u003e)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYou can print all the pieces on a Bambu A1 or larger machine.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eThe largest part is \u003c\/span\u003e\u003cu\u003e\u003cspan\u003e242mm x 240mm x 94mm.\u003c\/span\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cu\u003eThe ports are 63mm outer diameter.\u003c\/u\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse support materials (from base plate only) to print.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eI used thick acrylic for my lid, but I also designed a 3D printable lid.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYou will need to glue the cross brace to the interior valve, as well as the pin into the knob (it should move freely in the handle).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou will receive a secure link to download the file.\u003cbr\u003eThe pictured holder is printed in \u003cstrong\u003ePETG with 15% infill and 0.2mm layer height.\u003c\/strong\u003e\u003cbr\u003eThis is a \u003cstrong\u003eDIGITAL FILE\u003c\/strong\u003e only, y\u003cspan\u003eou'll need to print it yourself or have it printed before use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003e\u003cspan\u003eFor Personal use only. Please do not share or sell this model. \u003c\/span\u003e\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Diode Press","offers":[{"title":"Default Title","offer_id":46939809775815,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/6699\/4631\/files\/ffe02486-il_fullxfull.7408634738_sxfe.jpg?v=1785766603"},{"product_id":"marble-print-bar","title":"The Marble Print Bar | Hanging Print Drying Rack for Linocut and Relief Printing","description":"\u003ch2\u003e\u003cstrong\u003eThe Marble Print Bar\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eRunning out of table space mid-edition? This bar hangs from your ceiling and holds 17 freshly printed linocuts or woodcuts in open air. Glass marbles gently wedge each print in place.\u003c\/p\u003e\n\u003cp\u003eNo clips. No pressure points. Just a clean, dry print when you come back to it. \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow it works:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eSlide a freshly printed sheet between the marble and the wood. The marble holds it upright while it dries, then lifts out clean, no marks left behind. Three pre-installed eye hooks (two ends, one center) keep weight evenly distributed.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSolid wood bar, 36\" long x 1.5\" wide x 1.8\" tall\u003c\/li\u003e\n\u003cli\u003eHand-finished with water-based matte varnish\u003c\/li\u003e\n\u003cli\u003e17 glass marbles in your choice of color: white, green, black, clear, opaque blue, or clear blue (message me before ordering for other color availability)\u003c\/li\u003e\n\u003cli\u003eThree pre-installed eye hooks\u003c\/li\u003e\n\u003cli\u003eChoice of hard maple or walnut\u003c\/li\u003e\n\u003cli\u003eHolds 17 prints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou'll supply your own rope and ceiling hardware to fit your space.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eBuilt to grow with your practice:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eOne bar covers a small studio run. Two gives you room for regular edition work. Three handles a full edition with space to spare.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Bar (17 prints) — $158\u003c\/li\u003e\n\u003cli\u003eStudio Pair (34 prints) — $298 (save $18)\u003c\/li\u003e\n\u003cli\u003eEdition System (51 prints) — $449 (save $25)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBars can hang level or staggered. Adding a second or third bar later is simple. \u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eA note on paper:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThis bar is built for freshly printed sheets and prints between color layers, not soaking-wet paper. Fully saturated paper can mark where it touches the marble.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eProcessing time is two weeks. You'll get a shipping notice once it's on its way\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Diode Press","offers":[{"title":"Single Bar — Maple — (17 prints) — $158 \/ White","offer_id":46939810267335,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar — Maple — (17 prints) — $158 \/ Green","offer_id":46939810300103,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar — Maple — (17 prints) — $158 \/ Black","offer_id":46939810332871,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar — Maple — (17 prints) — $158 \/ Clear","offer_id":46939810365639,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar — Maple — (17 prints) — $158 \/ Opaque Blue","offer_id":46939810398407,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar — Maple — (17 prints) — $158 \/ Clear Blue","offer_id":46939810431175,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar— Walnut — (17 prints) — $158 \/ White","offer_id":46939810463943,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar— Walnut — (17 prints) — $158 \/ Green","offer_id":46939810496711,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar— Walnut — (17 prints) — $158 \/ Black","offer_id":46939810529479,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar— Walnut — (17 prints) — $158 \/ Clear","offer_id":46939810562247,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar— Walnut — (17 prints) — $158 \/ Opaque Blue","offer_id":46939810595015,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Single Bar— Walnut — (17 prints) — $158 \/ Clear Blue","offer_id":46939810627783,"sku":null,"price":158.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Maple — (34 prints) — $298 (save $18) \/ White","offer_id":46939810660551,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Maple — (34 prints) — $298 (save $18) \/ Green","offer_id":46939810693319,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Maple — (34 prints) — $298 (save $18) \/ Black","offer_id":46939810726087,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Maple — (34 prints) — $298 (save $18) \/ Clear","offer_id":46939810758855,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Maple — (34 prints) — $298 (save $18) \/ Opaque Blue","offer_id":46939810791623,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Maple — (34 prints) — $298 (save $18) \/ Clear Blue","offer_id":46939810824391,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Walnut — (34 prints) — $298 (save $18) \/ White","offer_id":46939810857159,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Walnut — (34 prints) — $298 (save $18) \/ Green","offer_id":46939810889927,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Walnut — (34 prints) — $298 (save $18) \/ Black","offer_id":46939810922695,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Walnut — (34 prints) — $298 (save $18) \/ Clear","offer_id":46939810955463,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Walnut — (34 prints) — $298 (save $18) \/ Opaque Blue","offer_id":46939810988231,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Studio Pair — Walnut — (34 prints) — $298 (save $18) \/ Clear Blue","offer_id":46939811020999,"sku":null,"price":298.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Maple — (51 prints) — $449 (save $25) \/ White","offer_id":46939811053767,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Maple — (51 prints) — $449 (save $25) \/ Green","offer_id":46939811086535,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Maple — (51 prints) — $449 (save $25) \/ Black","offer_id":46939811119303,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Maple — (51 prints) — $449 (save $25) \/ Clear","offer_id":46939811152071,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Maple — (51 prints) — $449 (save $25) \/ Opaque Blue","offer_id":46939811184839,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Maple — (51 prints) — $449 (save $25) \/ Clear Blue","offer_id":46939811217607,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Walnut — (51 prints) — $449 (save $25) \/ White","offer_id":46939811250375,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Walnut — (51 prints) — $449 (save $25) \/ Green","offer_id":46939811283143,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Walnut — (51 prints) — $449 (save $25) \/ Black","offer_id":46939811315911,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Walnut — (51 prints) — $449 (save $25) \/ Clear","offer_id":46939811348679,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Walnut — (51 prints) — $449 (save $25) \/ Opaque Blue","offer_id":46939811381447,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true},{"title":"Edition System —Walnut — (51 prints) — $449 (save $25) \/ Clear Blue","offer_id":46939811414215,"sku":null,"price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/6699\/4631\/files\/d4ef9a08-il_fullxfull.8054908932_7u0x.jpg?v=1785766603"},{"product_id":"ternes-burton-registration-pin-holder","title":"Ternes Burton Registration Pin Holder","description":"\u003cp\u003eKeep your workspace organized with this 3D printed Ternes Burton Registration Pin and tab holder.\u003c\/p\u003e\n\u003cp\u003eThis holder is specifically designed to accommodate the pins and tabs. There are 100 tabs in the prototype holder pictured, with room for more.\u003c\/p\u003e\n\u003cp\u003eProcessing time: Up to 10 business days before shipping\u003c\/p\u003e\n\u003cp\u003eWhat You Get:\u003c\/p\u003e\n\u003cp\u003e- 3D printed holder in durable PLA plastic\u003c\/p\u003e\n\u003cp\u003eShips fully assembled, ready to install\u003c\/p\u003e\n\u003cp\u003eChoice of three mounting options:\u003c\/p\u003e\n\u003cp\u003e- Screw mount (works with Command strips too)\u003c\/p\u003e\n\u003cp\u003e- IKEA SKADIS pegboard compatible\u003c\/p\u003e\n\u003cp\u003e- Standard pegboard (1\" × 1\" hole spacing)\u003c\/p\u003e\n\u003cp\u003ePrinted in white (other colors available, see below)\u003c\/p\u003e\n\u003cp\u003eVersatile in placement, this holder can be effortlessly mounted on your wall using a screw or other options like Command Strips (not included).\u003c\/p\u003e\n\u003cp\u003eEngineered to keep your pins and tabs from being lost and disorganized, this holder ensures convenient access while keeping your workspace organized.\u003c\/p\u003e\n\u003cp\u003eInstallation:\u003c\/p\u003e\n\u003cp\u003e- Screw mount: Set the holder where you want it, mark the screw holes, drill pilot holes if needed, and screw it in. You can also use a Command strip on the back if you don't want to drill into your wall.\u003c\/p\u003e\n\u003cp\u003e- SKADIS pegboard: Slide the mounting tabs into the pegboard holes. That's it.\u003c\/p\u003e\n\u003cp\u003e- Standard pegboard: Hook it onto your pegboard like any other pegboard accessory. Fits standard 1\" × 1\" hole spacing.\u003c\/p\u003e\n\u003cp\u003eCustom Options:\u003c\/p\u003e\n\u003cp\u003eNeed a different size, color, or mounting style? Send me a message before ordering. I'm happy to work with you on custom variations.\u003c\/p\u003e","brand":"Diode Press","offers":[{"title":"Screw Mount","offer_id":46939811446983,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"IKEA Skådis","offer_id":46939811479751,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Standard Pegboard","offer_id":46939811512519,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0799\/6699\/4631\/files\/52fc4281-il_fullxfull.7946276420_st32.jpg?v=1785766603"}],"url":"https:\/\/diodepress.com\/collections\/all-products.oembed","provider":"Diode Press","version":"1.0","type":"link"}