Photopolymer Bison Relief Print

In this project I create a photopolymer plate of a bison.

This print was inspired by a lithograph I made a few years ago. The piece was created by printing the polymer plate onto gold painted paper and allowed to fully dry.

Finally the print was mounted to a wood support panel and the coated with a thick epoxy resin finish.

If you'd like to purchase this print, you can check it out here:
Shop


Materials used in this project:
Art Resin: https://artresin.refersion.com/c/e9ef
Inka Gold Copper Paint: http://amzn.to/1PpOfJO
Matte Medium: http://amzn.to/1RkizeR
Wood Panels (This is an example of one I use often): http://amzn.to/1Mk5KZH

*The links above are affiliate links. They don't cost you anything to use, but help keep my ink cans full.

Previous
Previous

Succulent Plant Linocut Prints

Next
Next

How To Epoxy Coat Artwork With ArtResin